The principle of UV photocatalytic oxidation equipment, especially the production of UV ultraviolet sterilization lamp: the use of specially produced shocking reactive oxygen UV ultraviolet light direct emission of organic waste gas, cracking organic waste gas, such as ammonia, trimethylamine, hydrogen chloride, methyl sulphur hydrogen, methyl mercaptan, methyl sulfide, butyl acetate, ethyl acetate, two methyl two sulfur, carbon disulfide and butadiene, sulfide H2S, VOC, benzene, xylene, Molecular structure chain structure of toluene makes the molecular structure chain of odorous chemical substances in organic or inorganic polymer materials dissolve into low molecular structure chemical substances such as CO 2 and H 2 under shock ultraviolet light. High-energy and high-ozone ultraviolet (UV) beams are used to decompose oxygen molecules in the air to produce free oxygen, i.e. reactive oxygen species. Ozone is produced by combining oxygen molecules with oxygen molecules because of the unbalanced positron and negative electrons carried by free oxygen. UV + O2 to O-+O * (reactive oxygen) O+O2 to O3 (ozone), it is well known that ozone has a strong oxidation effect on organic compounds, and has an immediate effect on industrial waste gas and other irritating odor. After the industrial exhaust gas is input into the purification equipment by exhaust air equipment, the soot purifier uses shaking UV ultraviolet light and reactive oxygen species to carry out cooperative dissolution oxidation-reduction reaction on the organic waste gas, so that the organic waste gasification chemical substances can be dissolved into low molecular structured chemical substances, water and carbon dioxide, and then discharged outdoors according to the exhaust pipe. Using high energy-C beam to crack the molecular bonds of bacteria in industrial exhaust gas, destroy bacterial nucleic acid (DNA), and then oxidize through ozone to completely purify and kill bacteria. Considering the high efficiency of purifying indoor air, people have selected the equipment with high corona discharge current in-C stock band, which combines ultraviolet light with active oxygen, and uses single pulse corona discharge to release and absorb charges. The basic principle of technology is to eliminate harmful substances. -C band ultraviolet is mainly used to remove the decomposition and fission of hydrogen sulfide, ammonia, benzene, toluene, xylene, formaldehyde, ethyl acetate, ethane, acetone, urethane, resin and other gases, and turn organic matter into organic compounds.
Specially prepared metal catalysts: according to different organic exhaust gas components, 27 kinds of relative metal catalysts should be provided. The metal catalysts should be vacuolated stainless steel mesh holes as carrier vectors. The metal catalysts will react with the lamp source in various directions. The plastic metal catalyst will generate catalytic reaction speed under the 338 nanometer technology source, and magnify 10-30 times the effect of light source, so that it can be carried out with exhaust gas. Full reaction can shorten the contact time between exhaust gas and light source, so as to improve the purification efficiency of exhaust gas. Catalyst also has a purification effect similar to plant photosynthesis.
Environmental Science and technology dissolved organic waste gas molecular structure: application of 253.7 nanometer technology, stock band laser cutting, chain breaking, ignition, cracking of organic waste gas molecular chain, change the molecular formula, for the first time to solve; take 185 nanometer technology stock wave light on the organic waste gas molecular structure catalytic reaction, so that the damaged molecular structure of neutron or molecule to O3 fusion, organic or not. The molecular chain of the macromolecule odorous molecule is transformed into low molecular compound CO2, H2O and so on during the process of catalytic oxidation, which is the second treatment. According to different exhaust components, 27 or more inert catalysts are arranged. The catalyst uses honeycomb metal mesh as the carrier, and it contacts with the light source in all directions. The plastic metal catalyst is generated under the 338 nanometer technology lamp source. The reaction speed is increased by 10-30 times of the actual effect of the lamp source, so that it can adequately reflect with the organic waste gas, reduce the contact time between the organic waste gas and the lamp source, thus improving the efficiency of waste gas purification. The catalyst also has the similar effect of plant photosynthesis, purifying the waste gas as the third treatment. The maximum deodorization of the waste gas after triple treatment can reach 99%. The purification and deodorization of the waste gas can be achieved by triple treatment. The effect greatly exceeded the second level emission standard of GB16297-1996 "Comprehensive Emission Standard of Air Pollutants" and GB14554-93 "Odor Pollutants Emission Standard". Finally, the exhaust gas after high-energy ultraviolet photolysis catalytic oxidation is exhausted through the back-end fan to form negative pressure, which is discharged safely and up to the standard from a 15-meter chimney to the atmosphere.